Text Size: A / A
Print Email

COPD: Using Inhalers

Some COPD medications are taken using a device called an inhaler. The inhaler helps you take a measured dose of medication into your lungs. Not all inhalers work the same way. Have your healthcare provider show you how to use and care for the type of inhaler you’re given.

Using Metered-Dose Inhalers (MDIs) with Spacers

Breathe in

Breathe out

Metered-dose inhalers use a fine spray to dispense medication. You may be asked to use a spacer (holding tube) with your inhaler. The spacer helps make sure all the medication you need goes to your lungs.

  1. Remove the caps from the inhaler and spacer. Shake the inhaler well and attach the spacer. If the inhaler is being used for the first time or has not been used in a while, prime it as directed by its maker.

  2. Breathe out normally. Put the spacer between your teeth and close your lips tightly around it. Keep your chin up.

  3. Spray 1 puff into the spacer by pressing down on the inhaler. Then slowly breathe in as deeply as you can. This should take 3 to 5 seconds. (If you breathe too quickly, you may hear a whistling sound in the spacer.)

  4. Take the spacer out of your mouth. Hold your breath for a count of 10 (if possible). Then slowly breathe out. If a second dose is prescribed, wait at least 30 seconds before taking the next puff.

Using MDIs Without Spacers

Inhalers work best with spacers. But if you don’t have your spacer with you, these tips will help.

  1. Shake the inhaler and remove the cap. Breathe out through your mouth.

  2. Put the inhaler mouthpiece in your mouth and close your lips tightly around it. (Or, if told to do so by your healthcare provider, hold the inhaler 1 to 2 inches from your mouth.)

  3. Keep your chin up. Spray 1 puff by pressing down on the inhaler while breathing in deeply through your mouth for about 5 seconds. Hold your breath for a count of 10. Then breathe out slowly.

Using Dry-Powder Inhalers (DPIs)

Some inhalers use tiny grains of powder to dispense medication. These don’t require spacers. They often have counters that track how many doses you use. Dry-powder inhalers don’t all work the same way. Be sure you know how to use yours properly.

  1. Load the prescribed dose of medication by following the instructions that come with the inhaler.

  2. Breathe out normally, holding the inhaler away from your mouth. Hold your chin up.

  3. Put the mouthpiece between your lips. Breathe in quickly and deeply through the inhaler—not through your nose. You may not feel or taste the medication as you breathe in. This is normal.

  4. Take the mouthpiece out of your mouth. Hold your breath for a count of 10 (if possible).

  5. Breathe out slowly—but not through the inhaler. Moisture from your breath can make the powder stick inside the inhaler. Also, be sure to close the inhaler and store it in a dry place.

© 2000-2014 Krames StayWell, 780 Township Line Road, Yardley, PA 19067. All rights reserved. This information is not intended as a substitute for professional medical care. Always follow your healthcare professional's instructions.

Blue Cross Blue Shield of Massachusetts is an Independent Licensee of the Blue Cross and Blue Shield Association.
® Registered Marks of the Blue Cross and Blue Shield Association.
SM Service Marks of the Blue Cross and Blue Shield of Massachusetts.

Powered By Krames StayWell
Copyright © Krames StayWell except where otherwise noted.
View Mobile Site